Automobile car gasoline engine, for industrial works?
saeed_x61 asked:
We want to use an automobile gasoline engine for industrial works (industrial sweeping vehicles ). Usually industrial diesel engines are used for this purpose. While these diesel engines produce less power, they can work at nearly maximum speed (and therefore maximum power) for long time. But because of some considerations, we want to use an automobile gasoline engine, which can produce more power, but of course it can not work at maximum power speed for long time. So we have to design an electronic motor driver to control RPM of the motor to produce maximum power during a period of time to prevent damaging to the motor and also overheating.
So can you help me find the appropriate optimum diagram (RPM vs. Time in a period, for example in 100,000 revolution) to get maximum power without any damage. By the way, KIA motor which is used in ‘pride’ with 1323cc and 61HP is our choice.
Caffeinated Content
We want to use an automobile gasoline engine for industrial works (industrial sweeping vehicles ). Usually industrial diesel engines are used for this purpose. While these diesel engines produce less power, they can work at nearly maximum speed (and therefore maximum power) for long time. But because of some considerations, we want to use an automobile gasoline engine, which can produce more power, but of course it can not work at maximum power speed for long time. So we have to design an electronic motor driver to control RPM of the motor to produce maximum power during a period of time to prevent damaging to the motor and also overheating.
So can you help me find the appropriate optimum diagram (RPM vs. Time in a period, for example in 100,000 revolution) to get maximum power without any damage. By the way, KIA motor which is used in ‘pride’ with 1323cc and 61HP is our choice.
Caffeinated Content
Honestly, Kia engineers should be your contact point for this type of information, unless this is the engine that they source from Mazda… but in any case, the manufacturer should be able to help you with this.
If you contact their engineering departments, you’ll get lots of help. They love to hear from people who want to buy parts that they don’t currently manufacture at max capacity.
What you want is a Rev limit switch (or as some people call them,a Governor)A lot of race cars and motorcycles use them.You can find a shop that works on race cars or bikes,and check with them.They are simple to install.You may also want to check the web site How Stuff Works.They have a lot of information on just about everything.A lot of semi trucks use these.