bubba asked: I just put a new starter and solonoid and try it and it just go’s click can yall help plz.
This entry was posted
on Friday, July 17th, 2009 at 5:36 pm and is filed under Chevy Diesel.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Bubba, If you have good battery’s and a new starter and solenoid, then recheck and clean all battery terminals clamp, and ground clamps, battery to ground wire and clamps, engine to ground wire and clamps, and engine to body ground clamps, If it still click, check to see if you have a battery switch that may be bad, recheck the starter and solenoid, and if all check out , You my friend have a lock up engine. On the out side you may have a working solenoid and a bad battery to starter cable. What did it do before you have to put in new parts, that might give you a clue to what is wrong with it, be cause if you have check every thing that I have said toyou engine should be runing or at lest turning over when you try to start it.
my answer is try to check it out first on auto repair shop..